Rubber Mat Making Machine
This Rubber Mat Making Machine is a special vulcanizing machine for producing rubber floor tiles. Two sets of molds are arranged on each floor to cure in turn, which can effectively improve the production efficiency. At the same time configure manual push-pull die device, the operation is more convenient.
rubber mat making machine
This machine is a special vulcanizing machine for producing rubber floor tiles. Two sets of molds are arranged on each floor to cure in turn, which can effectively improve the production efficiency. At the same time configure manual push-pull die device, the operation is more convenient.
Mould closing force
Hot plate spacing
Hot plate layer
Main motor power
The thermal power
1. High speed open/close mould
2. High working pressure
3. Complete functions, automatic pressure compensation, automatic temperature control, automatic timing, uniform surface temperature of hot plate, precise and intuitive temperature control, stable and reliable pressure holding, safe and convenient operation, etc.
4. Compact structure, stable pressure, wide applicability, high efficiency
1. Conching: Put the rubber granulates and stain into the stirring barrel to stir, and then put into the adhesive to stir, This process requires for 4-6 minutes ( because the adhesive is easy to cure, so stir it when use ).
2. Weighing raw materials: Weight the rubber granulates stirred, according to the granulates' thickness requirement Of the tiles.
3. Paving and pressing: Paving the rubber granulates weighted on the mold, then floated it by trowel. Firstly paving the Surface rubber granulates which is fine and color, then the thickness and black.
4. Vulcanization molding: Covering anti adhesion cloth, pushing the mold into vulcanizer to vulcanize, the time of Vulcanization accord to the thickness of the rubber tiles, in general, 3-8inutes finished. After that, Mold separate automatic, then remove floor tile on the shelves to dry.
5. Inspecting: Inspect the surface of the floor tiles, no aberration, no flaw, line with the product quality.
Push and pull design save time and enlarge the capacity.
Kinds of molds.